SKS3 O1 1.2510 Hot rolled Cold Work Mould Steel flat Bar Alloy Die sheet Steel
The steel is an excellent oil-quenched die steel with good impact toughness, temper softening resistance, mechanical processing performance, toughness retention ability, high compressive strength, and small heat treatment deformation.
Refer to the corresponding steel grade China GB standard steel number 9CrWMn, China Taiwan CNS standard steel number SKS3, Germany Sastel GS standard steel number GS510, Germany DIN standard steel number 100MnCrW4, Germany DIN standard material number 1.2510, Sweden UDDEHOLM standard steel number ARNE, Sweden ASSAB ASSAB standard steel number DF-3, Swedish SS standard steel number 2140, Japanese JIS standard steel number SKS3, Japanese Datong DAIDO standard steel number GOA, Korean KS standard steel number STS3, American ASTM/UNS standard steel number 01/ T31501, International Standardization Organization ISO Standard Steel No. 95MnWCr1, French NF Standard Steel No. 90MnWCrV5, Russian ГOCL Standard Steel No. 9XBГ, British BS Standard Steel No. BO1.
SKS3/O1/1.2510 is an excellent steel that is widely used. It can be used as a blade material to produce a very tough and deep-grinding blade: Oil-Hardening type tool steel is the most widely used, and the best one is the SKS3/O1/1.2510 type. Its high manganese together with chromium and tungsten can increase the hardening energy, so that the steel does not require violent water quenching (generation It can also be hardened to a high hardness (HRC62) level with the oil quenching of the bunting. SKS3/O1/1.2510 steel has good machinability, but its toughness and endurance are weak. The blades made with it are perfectly suitable for daily use; and heat treatment is easy. SKS3/O1/1.2510 Blade retention is very strong. Generally speaking, SKS3/O1/1.2510 can be polished very finely. It is tough and can be polished with confidence.
Product Base Information:
1.International Standard
| GB |
DIN |
SWEDEN |
JIS |
| 9CrWMn |
1.2510 |
DF-2 |
SKS3 |
2.Chermical Compisition(Wt%) :
| Standard |
Grade |
C |
Si |
Mn |
P≤ |
S≤ |
Cr |
Mo |
V |
W |
| DIN |
1.2510 |
0.90-1.05 |
0.15-0.35 |
1.00-1.20 |
0.035 |
0.035 |
0.50-0.70 |
- |
0.05-0.15 |
- |
| GB |
9CrWMn |
0.85-0.95 |
≤0.40 |
0.9-1.20 |
0.03 |
0.03 |
0.50-0.80 |
- |
- |
0.50-0.80 |
3.Available Size(mm) :
| Flat Bar Size |
Round Bar Size(mm) |
| Thickness |
Width |
Length |
Diameter |
Length |
| 10-300 |
155-610 |
2500-5800 |
10-400 |
2500-5800 |
Surface condition
| Black surface/ Grinded surface / Machined surface /Milled surface |
Characteristics
1,It is suitable for making wear-resistant and non-deformable cold work molds, such as sheet stamping molds and jewelry embossing molds.
2,It is mainly used for various metal stamping dies and forming tools, such as cutting knife dies and tooling bushes.
3,Cutting tools, wood cutting tools, etc.
4, Can be widely used as a cutting tool.
5,Abrasive plastic forming molds and small plastic modules, etc.
|
Applications
| O1 ,SKS3,1.2510 steel is the standard non-deformable oil steel and the best, widely used. The higher manganese content, chromium and tungsten content of the steel can increase the hardening capacity, so that the steel does not need to be vigorously water-cooled quenching. Through oil cooling quenching, the hardness can be as high as 62HRC. The steel also has good machinability and wear resistance, heat treatment performance is stable, small dimensional deformation, but toughness and corrosion resistance are weak. |
Cutting
We can cut the size according to your requirements and customize it exclusively. We have more than 10 vertical saws and horizontal saws with
high efficiency and accurate cutting.
4.Product Process:
Electric-Furnace Smelting(EF)→Ladle Furnace(LF)→Vacuum Degassing(VD)→ Argon protected ingot →Multidirectional
Forging → (Concave forging →)Normalizing+Hydrogen Diffusion Annealing → Ultrasonic Flaw Detection →Queching+Tempering Prehardened
2. Product Performance:
| (1) With excellent machinability, hardened, the size is extremely stable, hardened, the surface has a very high hardness. |
| (2) With high toughness, so excellent anti-wear ability and easy forging and quenching. |
(3) It can be widely used in cutting, cold stamping and forming tools; such as notch die, cold stamping die, various gauges, reamers,
mold bushings, and plastic small modules. |
| (4) Annealing hardness:230HB |
3. Heat Treatment:
| Quenching |
Tempering |
| Heating temperature/ºC |
Cooling way |
Hardness (HRC) |
Tempering temperature
/ºC |
Tempering number |
Hardness
(HRC) |
| Preheating |
Last heating |
| 550-650 |
800-850 |
Oil Cooling |
60-65 |
150-200 |
1 |
≥60 |
5.Product Show:
7. About us :
HK JIMI STEEL CO.,Ltd Was established in 2012, located in Shunde District of Guangdong Province, It is an import and export trading company mainly engaged in advanced special steel, die steel, alloy steel, and steel processing general machinery and equipment. The company adheres to the concept of "high quality, high requirements and good faith",
Cooperating with more than 20 famous steel mills in China, rich in spot stock of products.
Our company has a variety of processing equipment and all kinds of inspection and testing equipment, such as horizontal sawing machine, vertical sawing machine, milling machine, bilateral milling machine, precision milling machine, plane grinder and so on. The products with short producing time, excellent quality and high precision can provide a high-quality product choice for the vast number of customers at home and abroad.
Our customer group spread all over the domestic provinces and cities, abroad including Europe, the United States, Australia, the Middle East, Southeast Asia and other more than 20 countries and regions, along with over 100 long-term stable cooperation customers...Choosing Xingxiong will bring you a better experience.
PLASTIC MOULD STEEL: 1.2311, 1.2312, 1.2738, P20, 1.2083, 1.2316, NAK80, P40, 1.2738HH
HOT WORK MOULD STEEL: 1.2344, SKD61, H13, H11, FDAC, 8407,8418
COLD WORL MOULD STEEL: SKD11, D3, SKS3, 1.2080, 1.2379, CR12MOV, O1, D2
STRUCTURAL ALLOY STEEL: 4140, 20CR, 40Cr, 35CrMo, 42CrMo, 38CrmoAi, SCM440, SCM420, 1.7225
CARBON STEEL &: Q235, Gcr15, S45C, S50C, S55C
CNC surface grinding machine, NC side boring machine, Band saw, CNC double head machine, Vertical Band saw, CNC milling machine, Double alloy saw blade, wireless remote control crane, Magnetic chuck
8, Stock:
High-quality stock for various steel flat bar and round bar.
Alloy steel / Cold work steel / Hot work steel / Plastic mold steel and Stainless
For more tool and die steel please check the list:
8 Application :
1.2510/ SKS3/O1 die steel is a high-carbon high-chromium leestenite steel, which is also a widely used cold-work die steel. The steel has good hardenability, wear resistance, and hot workability. The carbides are well distributed in the steel and are available It is used to manufacture various cold work molds with complex shapes and heavy working conditions, such as cold die punches, thread rolling dies, wire drawing dies, material dies, metallurgical powder dies, woodworking cutting tools, cold cutting scissors drill sleeves and gauges. During our research and development, after repeated exploration and testing, we have developed a reasonable smelting process and special ingot molds and forging processes to make the material structure uniform and consistent.In addition, we are bold and innovative in the processing of standard materials. Greatly improve the efficiency, shorten the cycle and reduce the cost.
Each steel before packing will be inspected carefully by our professionals using specific testing instruments:
• Ultrasonic testing
• Spectro-graphical analysis
• Hardness testing
• Micro-structure analysis
Delivery Service
Provide transportation service to port and door to door
CIF / FOB /EXW.
All doc to you by DHL / UPS to help you clean the customs more quickly.
Delivery Time
1) For abundant stock, 7-15 days.
2) For customized products, 15-30 days.
11.FAQ:
Q1: What do you do for the control of the quality?
A1: Before loading into the container, our products will all be inspected by ultrasonic inspection. Quality Grade conforms to SEP 1921-84 E/e, D/d, C/c as per customer's request.
Q2:: What are your hot-selling products?
A2: D2/1.2379, H13/1.2344, CR12MOV, DC53, CR8, abundant stock for both plates and rounds. Competitive prices and short lead-time.
Q3: Can we visit your company and factory?
A3: Yes, warmly welcome! We can book the hotel for you before you come to China and arrange our driver to our airport to pick you up when you come.
Q4: Are you a manufacturer or merely a trader?
A4: We are a group of companies and owned manufacturer bases and trading companies. We specialized in plastic mold steel, hot work mold steel, cold work mold steel, alloy steel for mechanical, high-speed steel, etc. All materials are of high quality and competitive price.
Audited Supplier 
){kind=link}
){kind=link}